High quality 6242 titanium bar bar by forging processing for aircraft engine compressor parts and aircraft skin materials
Item specifics
- Grade
- Ti-6AL-2Sn-4Zr-2Mo-0.1Si
- Diameter
- 6mm - 300 mm
- Length
- ≤6000mm
- Technology
- Hot-Rolled, Hot forging , Machining
- Condition
- Cold rolled(Y), Hot rolled(R), Annealed (M)
- Surface
- Pickling surface, Polished surface, Black surface
- Specifications
- Aerospace, Medical, Industrial
Review
Description
As titanium round bar stock supplier,we always update titanium bar news for our stock materials , our stock materials have been strictly inspected and the quality is guaranteed. We provide titanium bar price very competitive. The following are detail informations about our materials.
Chemical composition
Chemical composition, weight percent (%) | |||||||||||||||
Grade |
C ≤ |
O ≤ | N ≤ |
H ≤ |
Fe ≤ | Al | Sn |
Zr |
Si | Ni | Mo | Other Elements Max. each | Other Elements Max. total | ||
Ti6242 | 0.05 | 0.15 | 0.05 | 0.0125 | 0.25 | 5.5～6.5 | 1.8～2.2 | 3.6～4.4 | ≤0.13 | — | 1.8～2.2 | 0.1 | 0.3 | ||
Physical properties
Grade | Physical properties | ||||||
|
Tensile strength Min |
Yield strength (0.2%, offset) |
Elongation in 50mm Min (%) |
|||||
ksi | MPa | Min | Max | ||||
ksi | MPa | ksi | MPa | ||||
Gr5 | 130 | 895 | 120 | 825 | — | — | 10 |
Tolerance (mm)
Diameter | tolerance | ||
Hot forging bar | Hot rolling bar | Cold rolling bar | |
6～15 | ±1.0 | ±0.60 | ±0.30 |
16～25 | ±1.5 | ±0.70 | ±0.40 |
26～40 | ±2.0 | ±1.0 | ±0.50 |
|
41～60
|
±2.5
|
±1.5
|
±0.60
|
|
61～90
|
±3.0
|
±2.0
|
±0.80
|
|
91～120
|
±3.5
|
±2.2
|
±1.20
|
121～160 | ±5.0 | — | ±1.80 |
|
160～200
|
±6.5
|
—
|
±2.00
|
201～230 | ±7.0 | — | ±2.50 |
Features :
High tensile strength;
High corrosion resistance;
Low density, good thermal stability;
Non-ferromagnetic;
Good bio-compatibility;
High temperature and low temperature resistance;
High resistance to strong acid and strong alkali and so on.
Application :
Medical implants, medical instruments;
Aerospace, Industry, Navigation, artifical bones;
Sporting products;
Electroplating equipment;
Machining field, Automobile field;
Axis machining, the frame of the planes;
The equipment used in the sea water;
Testing :
Chemical composition test,
Physical properties test,
Appearance defects inspection,
Ultrasonic flaw detection,
Eddy current testing.
What we can do for you?
- If the above model is not suitable for your workpiece, please tell us your need and then we can send you the most satisfying drawing.
- contact us
