- Issue Time
Titanium fittings solve the problem of pipeline corrosion in industrial applications.
In recent years, the standardized production of titanium pipe fittings has appeared in our market. This is also an innovation in the application of titanium pipes, which greatly increases the service life of titanium pipes and enhances the application of titanium. The titanium alloy elbows produced by this process have uniform wall thickness. It introduces the production and development of titanium pipe fitting standards inside and outside the market, as well as the production and standardization of titanium pipe fittings in our market.
Pipeline corrosion is a very serious destructive factor in the current industrial development. According to relevant media reports, the annual loss of steel due to corrosion is more than 10,000 tons. Titanium pipelines transport flammable, explosive, damaging, and corrosive media, which has dangerous factors. Therefore, the higher the requirements for titanium alloy pipe fittings.
Titanium has the advantages of high strength, light weight, good heat transfer performance, corrosion resistance, etc., and has been widely used in the chemical industry. These characteristics of titanium make it a relatively economical method to solve chemical engineering problems. Although the investment cost of titanium is higher than that of general performance materials, titanium has been widely used in the chemical industry. According to life cycle analysis, the use of titanium pipe fittings can be Reduce production costs by reducing maintenance, shortening downtime, increasing product quality and increasing pipeline life.
At present, titanium pipe fittings have been widely used in chemical, petroleum, petrochemical, vacuum salt production, preparations, ocean engineering, electric power and other industries. Titanium is widely used in corrosive media due to its good corrosion resistance, such as ion-exchange membrane caustic soda and propylene oxide. Titanium materials have been widely used in equipment and pipelines. Titanium pipe fittings are also used in formic acid, Methane chloride and other projects to solve the problem of pipeline corrosion.
We MMR do evo x titanium intercooler pipe and titanium pipe coil.